Application of industrial heat exchangers
Ferrous metallurgy
Group (15)
montazh_reku04
montazh_reku06
recuperator-132
recuperator-138
recuperator-78
recuperator-86
recuperator-87
recuperator-90
reviziya-recuperatora-15
Section rolling production
Forging and Press Production
Sheet rolling production
Heat treatment
Blast furnace production
Ladle Drying Stand
Сombined heat and power plant of a steam blowing station
Ribbed plate recuperators
Common application
Applicable when waste heat of technological or other processes of metallurgy, petrochemistry, mechanical engineering, chemical industry, shipbuilding, etc. is released to the atmosphere.
Instead of other designs
- When the temperature of the flue gases is above 1000-1100 ° С
- When using increased dust content of flue gases (more than 100 g / Nm3), as well as medium with a significant amount of abrasive components
- When operating in highly aggressive environments
- In case of flow rates of at least one gas medium over 500 000 Nm3 / h
- For cyclic processes with high temperature and low temperature periods (for example, in non-ferrous metallurgy)
Non-standard application
- In cases when installation space for recuperator is limited. The heat exchangers of the ribbed plate type, along with other parameters being equal, have 2-5 times less dimensions than other structures.
- It does not require expensive redesign of ducts and external constructions. Thus, the new generation ribbed plate recuperators are actively used in the processes of import substitution at enterprises in various industries.
Fuel economy when using recuperators of the type ribbed plate
Air heating supplied to the furnace burners (blast) of allied productions
Air heating supplied to the furnace burners (blast) of allied productions
Air heating for premises heating system and other domestic needs
Combined Use of Heated Air
Process gas (air) heat recovery
Application effect
Reduced costs for the equipment used in the technological cycle and increased service life due to decreased operating temperature (gas ducts, chimney stacks, injectors, smoke exhausters, valves, etc.)
Compliance with environmental standards
Compliance with the Law No. 261 FZ “On Energy Saving”
Reduced costs for gas cleaning
Reduced fuel consuption
Increased efficiency of production process
Chemical and mechanical fuel afterburning
Reduced ordering costs
Short payback period
Press center
Application
Your partner in metalworks in Russia. Metalwork contractor for your projects in Russia
Application
Waste heat recovery from sinter in ignition furnaces
Application
Industrial heat exchangers for mine air heating
Application
Industrial heat exchangers in furnace heating cycles
